During much of unknown times for most of us, the reels of gyratory spindle or the multipliers, open to us unsuspected possibilities for the practice of lance of the ends with superb results. Of a great acceptance on the Anglo-Saxon market they finally start to be seen in the exits of fishing of a significant number of bearings.

The establishment of these reels, each larger time between fishermen of level high and average, due mainly has with the possibility of carrying out launch with almost null frictions, it makes it possible to obtain very considerable distances by the suitable use of canes distribution and multipliers. Its power of traction is really astonishing while acting in a linear way on our sedales, by maintaining a contact almost direct with the capture.

From similarity marked with reels used in the light casting, they are clearly differentiated from those by the lack of rings it guides wire, omitted to voluntarily avoid minimal friction in the exit of the line. Very technical machines and which generally combine several types of brakes which act on the spindle of the drum by means of centrifugal actions and friction; they need a continuous drive for their correct use. The phantom of the bird's nests or pelucas, which is produced not slowing down by the use of the finger inch the rotation of the drum by reaching lead the surface of water, causes in many ventilators an unjustified fear for its use.  There are currently models at very reasonable prices that, by a correct adjustment their brakes, make it possible in much case to forget so much fears embrouillements and they enable us to enjoy these genuine tools of precision with a minimal drive.

We will maintain that in its care an enlightened washing of the totality of the components to the means one rinses abundant with fresh water; by holding some account owing to the fact that the spindle and the wire are integrated in the carcass, we will especially pay attention to the absolute elimination of any saline tank which it could contain. Its complete lubrication must be carried out in a periodic way by lending great care to the density of oils used, since an excessive grammage of the latter would act like a braking added to the brakes themselves, as well as a very fine oil could produce the contrary effect. Just like it occurs in the case of those of fixed spindle, it is fundamental to locate a sketch of parts which details in particular the situation of the elements of braking, like its correct installation.